Seal & Stain™ Pre-Stain/Clear Stain Base

Seal & Stain™ Pre-Stain/Clear Stain Base

Use as a pre-stain treatment on wooden surfaces to reduce blotchy areas in soft woods before staining.  Sand wooden surface with 150 or 180 grit sandpaper.  Apply by spray, brush or rag liberally over entire surface and remove excess by wiping with a cloth.  Allow Seal & Stain™ Pre-Stain/Clear Stain Base to dry 15-30 minutes before applying any M545 stain color.  Best results are achieved if the stain is applied within 12 hours.  Use a clear stain base with colorants to mix custom colors.  Up to 20% by volume of Mohawk M500 or HUL 844 tint colorants may be added to Seal & Stain™ Pre-Stain/Clear Stain Base to create custom stain colors.  Seal & Stain™ Pre-Stain/Clear Stain Base may also be added to any M545 wiping stain to reduce color intensity.  Note: Bases are short filled to accommodate colorant.

⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. Applies to product(s) below.

 

M545-0106

Seal & Stain™ Pre-Stain/Clear Stain Base 29 Oz

$14.53


M545-0107

Seal & Stain™ Pre-Stain/Clear Stain Base 116 Oz

$48.96



SKU Product Name PDS SDS
M545-0106 Seal & Stain™ Pre-Stain/Clear Stain Base 29 Oz PDS SDS
M545-0107 Seal & Stain™ Pre-Stain/Clear Stain Base 116 Oz PDS SDS